Enc/Apag programado del SAI

UPS Action
Remote Shutdown
Calendario semanal
Programar Fecha
Despertar LAN

When UPS event (UPS sobrecarga / AC Falla de Potencia / UPS Bateria Baja / UPS Temperatura Alta / capacidad de bateria Baja) or NetFeeler event (Temperatura alta / Temperatura Baja / Humedad Alta / Humedad Baja / Agua / Humo / Gas / Seguridad1~7) occur, then delay turn off UPS or Host (setting on "Remote Shutdown" tab)

This section is to set 8 host for remote shutdown. Shutdown action can be executed by setting action on "UPS Action" tab or clicking on Test button.
Please test before using this function.

* Please remember to click "Apply" to save your changes.

This section is to set the time to turn on/off the UPS each day in the week. Click a time point to configure the time and power status. Clicking it again allows you to edit or remove the setting. : UPS turn-off time. : UPS turn-on time. : UPS on during this time.
Se enviará una advertencia _ antes del evento de apagado programado	NetAgent will send a warning message before a scheduled shutdown. This section sets the delay time period after the message is sent and before the scheduled shutdown is started.

* Please remember to click "Apply" to save your changes.

This section is to set the time to turn on/off the UPS on particular days. (Eg, holidays.) After setting the time and action on the right, the calendar view on the left will visually display the UPS power status. : UPS turn-off time. : UPS turn-on time. : UPS on during this time.
Se enviará una advertencia _ antes del evento de apagado programado	NetAgent will send a warning message before a scheduled shutdown. This section sets the delay time period after the message is sent and before the scheduled shutdown is started.

This section is to wake the PC within the network. (Make sure the PC has such function supported and configure as "Enabled" under BIOS.) Enter the IP address of that PC and system would search its MAC accordingly. You can test this feature before using it.
encendido remoto despues de restablecimiento de energia Esperar hasta que la capacidad de bateria alcance _ %	This section is set to wake up the remote host when the utility power is restored or the battery capacity reaches the preset value.
Wake up remote host after UPS output restore Esperar hasta que la capacidad de bateria alcance _ %	This section is set to wake up the remote host when UPS output is restored or the battery capacity reaches the preset value.