IP Address
IP Address
This section is to set NetAgent IP address.
Subnet Mask
This section is to set NetAgent Subnet Mask.
Gateway
This section is to set NetAgent Gateway.
Obtain an IP address
This section is to choose to set NetAgent IP address manually or via DHCP.
The above 4 sections can be set in Netility as well. NetAgent will reboot after any of the above are changed.

	DNS Server IP
Primary DNS Server IP
This section is to set NetAgent primary DNS Server IP address.
Secondary DNS Server IP
This section is to set NetAgent secondary DNS Server IP address. NetAgent will use the secondary DNS Server IP address when the Primary DNS Server IP address is not working.

	Ethernet
Connection Type
This section is to set communication speed between NetAgent and Network. NetAgent will reboot after Connection Type is changed.
Stop UPS communication when Ethernet disconnected
This section is to set if stop UPS communication when NetAgent disconnects with Ethernet.

	Dynamic DNS
Services Provider
NetAgent can be configured to register with any of the Dynamic DNS providers. In general, to register a Domain Name; Go to the DDNS provider website listed. Register a new user account and password with the DDNS provider. Choose a Domain Name to point to your current Dynamic IP Enter information obtained in (b) and (c) into NetAgent DDNS fields
Domain Name
This is the Domain Name you have created from the above selected DDNS provider.
Login Name
This is the Login / Account name that you have created with the selected DDNS provider.
Login Password
Enter the Password you have assigned to your DDNS Account.
Use external STUN server to get Public IP to register
Choose Yes to ensure that NetAgent uses the WAN / Public IP to update the selected DDNS server.
This is a free service that allows the user to alias a dynamic IP address to a static hostname.

	PPPoE
When Connection should be made
This is to set if use PPPoE to connect with NetAgent UPS. Disabled Default setting. Connect always NetAgent will automatically dial up and maintain continuous connection.
Login Name
Enter the login name assigned by your ISP.
Login Password
Enter the password assigned by your ISP.
Use this option to allow NetAgent to connect to the Internet directly using your xDSL modem. Once set-up, NetAgent will connect directly to the Internet without going through a router. The LCD will display the current WAN / Public IP instead of the LAN IP Address. Note: System will reboot if any configuration applies.

This page is to set NetAgent Network settings.