UPS Testing
Cancel Test
This function is to abort a test when it is executing.
Deep Battery Test for _ minute(s)
This is to test if battery works normally.
Test Until Battery Low
This function is to execute until battery low.
Cancel Test
This is to stop any self test that executed.

	Miscellaneous
Turn off UPS when AC failed/Reboot UPS
Selecting ' Turn off UPS when AC failed' will turn off the UPS. You can reboot the UPS by selecting ' Reboot UPS'.
Put UPS in Sleep mode for __ minutes/Wake up UPS
When the UPS is put into Sleep mode, it will not provide power. The UPS will provide power again after Sleep mode time is complete.
Reboot UPS
When execute such command, UPS load would start over.
Wake Up UPS
This function is to start up the UPS.
UPS Buzzer On/Off
This is to turn on/ off the UPS buzzer.

This page is to provide remote UPS test functions. Choose the test item, then click on 'Apply' to execute it. (Please refer to the UPS manual for individual UPS Test functions.) If you are using a Contact Closure UPS, you will only be able to use the function ' Turn off UPS when AC Failed'.