This column shows the wireless network IP address.
SMS Settings
SMS Server, SMS Server Port
This section is to set SMSAgent’s IP address (e.g. 192.168.0.180) and Port Number (default:80).
Account Name, Password
This section is to set SMSAgent’s account, password (SMSAgent webpag-->Configuration-->Web/Telnet).
Send SMS When Event Occurs
Select "YES" to receive SMS when an Event Occurs. "NO" (default) to disable.
Receiver cellular number (for Event Log)
This section is to set the recipient’s mobile number. A total of 8 mobile numbers can be assign. (Selectable events list is same as SNMP webpage.)
Note: 1) Enter mobile number same as sending from mobile.
Note: 2) Please refer to SMSAgent’s user manual for further information.
To send SMS by 3 ports of NetAgent
Choose between local modem or SMSAgent to send SMS.
Warning message through SMS when event occurs
Mode
Suitable Condition
Configuration
Disabled
Not to use SMS function.
No configuration required.
Local Modem
When NetAgent connects with GPRS Modem.
Message service, port, account and password links to NetAgent’s IP automatically.
SMSAgent
When NetAgent has no Modem connected.
Configure message service, port, account and password same as send SMS by single port of NetAgent.
Recipient’s mobile number (Event Notification)
This section is to set the recipient’s mobile number. A total of 8 mobile numbers can be assign. (Selectable events list is same as SNMP webpage.)
Note: 1) Enter mobile number same as sending from mobile.
Note: 2) Please refer to SMSAgent’s user manual for further information.
When NetAgent detects UPS events, it allows Short Message Signals (“SMS”) be sent and received using a GSM Modem. Operation information are as below for single and three ports of NetAgent.
